Organic Fertilizer Machine Manufacturer/Supplier

Flat mold organic fertilizer granulator is widely used in large, medium and small aquaculture, grain and feed processing plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small feed processing plants. use. In order to help everyone better maintain and extend the service life of the flat mold organic fertilizer granulator, we will share the maintenance method of the flat mold organic fertilizer granulator.

Maintenance method of flat mold organic fertilizer granulator:

1. Before the start of the flat-die organic fertilizer granulator, it is necessary to strictly check whether the installation of various parts of the machine meets the requirements. If the screw bolts are loose, you can use the hand to gently pull the belt to test the rotation, whether there is a phenomenon such as shelling. At the same time, check the direction of rotation. It is strictly forbidden to crush flammable and explosive materials to avoid accidents.

2. In addition to always paying attention to check the looseness of each part, it is necessary to pay attention to the wear of the wearing parts of the flat mold organic fertilizer granulator. If the wear is serious, it should be replaced in time to avoid damage to the main parts. And take the necessary fire prevention measures.

3. Due to the high speed of the flat mold organic fertilizer granulator, in addition to the correct installation, it is necessary to maintain good lubrication to ensure the normal operation of the machine. Under normal circumstances, the bearing temperature does not exceed 70 degrees is normal. The main bearing is once added with butter and molybdenum disulfide once a week.