Organic Fertilizer Machine Manufacturer/Supplier

Introduction to Flat die pellet mill fertilizer granulator:

Flat die pellet mill fertilizer granulator is also called pellet feed machine. It is widely used in organic fertilizer granulation according to the requirements of different customers in different regions. Flat die pellet mill fertilizer granulator is based on the mechanical circular motion. The motor is powered. Under the action of friction, the pressure stick rotates, the temperature between the pressure stick and the particles is generated, and the powdery material is gelatinized at the high temperature. The pressure is discharged from the die hole, and the prepared pellets are sent out of the machine through the tray, and the length of the particles is controlled by a cutter.

Application of Flat die pellet mill fertilizer granulator:

Granular feeds are produced from a wide range of sources such as corn stover, bean straw, wheat straw, straw, calyx (shell), sweet potato, alfalfa, rapeseed and the like. After the forage is made of granules by Flat die pellet mill fertilizer granulator, the density is high and the capacity is large, which is beneficial to long-distance transportation and realizes the digestive utilization of crop straws. The pellet feed is ripened by high temperature and has good palatability after gelatinization, which is very popular among farmers. The feeding rate of cattle and sheep can reach 100%, the digestion and absorption rate can be increased by more than 60%, the milk production of dairy cows is increased by more than 10%, and the weight gain of beef cattle is increased by more than 15%. The raw material of organic fertilizer comes from various livestock and poultry manure. After fermentation, the manure of livestock and poultry is a good powdery organic fertilizer. It does not need to add any other ingredients. However, with the development of science, powdered organic fertilizer is not suitable for machine broadcasting. The Flat die pellet mill fertilizer granulator solves this problem. It not only solves the problems of cross infection and environmental pollution of manure, but also contributes a lot to economic, social and ecological benefits.

Advantage of Flat die pellet mill fertilizer granulator:

1. Flat die pellet mill fertilizer granulator is mainly used for particle processing in (bio) organic fertilizer and aquaculture processing industries;
2, Flat die pellet mill fertilizer granulator processed granular material smooth surface, moderate hardness, low temperature rise during processing and can better maintain the nutrients inside the raw materials;
3, the particle composition is uniform, the shape is neat, the pore size of the particle can be divided into: ф3, ф3.5, ф4, ф5, ф6, ф 8, ф9, ф10 and so on. Users can choose according to production needs when ordering the Flat die pellet mill fertilizer granulator;
4. Due to the low moisture content of the particles, it is easy to store, and can maintain the original state in water for a long time, greatly improving the utilization rate of materials.

Notice of Flat die pellet mill fertilizer granulator:

1. When using the Flat die pellet mill fertilizer granulator, it should be noted that there should be no hard objects such as stones and iron blocks in the raw materials. After the roller is working for more than ten shifts (8 hours for one shift), it is necessary to remove the heat and apply high temperature resistance to the bearings. Grease makes the roller work well and prolongs the service life of the bearing;
2. When the Flat die pellet mill fertilizer granulator is granulated, it is strictly prohibited to contact the squeezing roller with the template;
3. If the particles are broken or not pressed properly, the crude fiber material formula should be reduced to less than 50%;
4. Flat die pellet mill fertilizer granulator granulation occurs when there is no granulation, no discharge, the membrane should be removed, after the hole is opened, appropriate fiber materials can be added to restart granulation;
5. The tightness of the belt of Flat die pellet mill fertilizer granulator should be checked frequently, and the gearbox leaks oil and the oil seal is replaced in time.

Working principle of  Flat die pellet mill fertilizer granulator:

Flat die pellet mill fertilizer granulator is based on the mechanical circular motion. The motor is powered. Under the action of friction, the pressure stick rotates, the temperature between the pressure stick and the particles is generated, and the powdery material is gelatinized at the high temperature. The pressure is discharged from the die hole, and the prepared pellets are sent out through a tray to a Flat die pellet mill fertilizer granulator, and the length of the pellet is controlled by a cutter.