Organic Fertilizer Machine Manufacturer/Supplier

The disc granulator is reinforced with a plurality of radiant steel plates, which are durable and never deformed. The thickened, weighted, and sturdy base design eliminates the need for anchor bolts for smooth operation. The main gear of the granulator is quenched by high frequency and the service life is doubled. The disc granulator has the characteristics of uniform granulation, high granulation rate, stable operation, durable equipment and long service life. It is an ideal equipment for users to choose.

The disc granulator is mainly used for granulating into powder balls, small granules or small pieces of materials, such as coal powder, cement, clinker and fertilizer. Disc granulator is an important part of organic fertilizer equipment. It has a direct
impact on the quality of granular organic fertilizer. The roundness, uniformity and fertilizer retention and fertilizer retention of the granules are not small.

The scope of the disc granulator
Disc granulator is suitable for various non-stick materials in powder, material or small pieces, such as pulverized coal, cement, clinker, limestone, shale, coal gangue, clay, etc. Powder, granular or small block materials. Disc granulators can be widely used in gold processing plants, coal mining plants and chemical, infrastructure and mechanized foundry workshops. The machine has simple structure, convenient adjustment and superior performance. The disc granulator is suitable for materials with a particle size of not more than 50 mm, and is not suitable for conveying materials with high viscosity, not easy to flow, and materials with particularly good fluidity.

Disc granulator installation
The disc tilt angle is user adjustable and the adjustment range is between 35° and 55°. Below we will explain in detail the installation steps and usage of the disc granulator.
1. The disc granulator is installed on the ground foundation, and the unevenness is not more than 1/1000. After fixing the equipment on the foundation, tighten the anchor nut.
2, after the disc granulator is fixed, before use, the gear unit, the bearing housing and all rotating parts are filled with lubricating oil, and the power is tested for trial operation.
3. Before opening the disc granulator, check the surroundings of the machine and the turntable in advance, whether there is any foreign matter blocking the operation around, whether the connecting bolt is tight, and drive after all normal
operation.
4. After one hour of test operation, check whether the temperature of the motor, reducer and housing is normal (motor, reducer and housing temperature should not exceed 70°).